Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466
>
>
>
Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

$4888.00

CHOICE Brand and SGCCTV Brand are Singapore IPOS Trade Mark Registered.
Widely deployed in Shopping Malls, Residential, Commercial, Office, Warehouse.
Compatible with ALL DVR & NVR ONVIF protocols. 
Great Technical Support at Sim Lim Square 02-81 11am~7pm Daily +65 98534404
- +
Add to WishlistAdd to Compare

Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

CHOICECYCLE CCTV offer the best Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

Full high turnstile is a kind of access control equipment designed for places with high class security requirements.
It is easy to combine IC access control, ID access control, Card reader, Fingerprint, Face recognition and other identification devices.

It control, discipline, high security to avoid intrusion & parcel disappearing.
Replacing Human with intelligent and efficient management of passage.
Full Height turnstile is the best choice for access control of modern building and tight security areas.
Full Height series are fully applicable to a high traffic flow places like Store House, School, Factory, Park, Housing estate and other places.

 

Product structure and principle
The mechanical system is composed of upper box, side column, guardrail, rotation shaft, pedestal bearing, core.

Function Features
 Damper buffer device
 Standard signal input port, can be connected with most of the access control board, fingerprint device and scanner other equipment;
 The turnstile has automatic reset function, if people swipe the authorized card, but don’t pass through within the settled time, it need to swipe card again for entry.
 Card-reading Recording function
 Automatic opening after emergency fire signal input
 Anti following : prevent illegal passing
 High light LED indicator , displaying passing status.
 Normal open can be also controlled via external button or manual key unlock
 Gate will automatically open when power failure(connect 24V battery)

 

Single Lane S$4888.00
Double Lane S$8888.00
Standard Steel Full Height Turnstile include Delivery, Setup Manual & Video.
Optional Assemble & Setup.

1. Collection from SGCCTV   Choicecycle Sim Lim Square CCTV SPECIALIST #02-81 11am~8pm. Whatsapp 90254466 for stock level.
2. Payment by PayNow 90254466 & Paylah QR code will receive Free Gift Warning Stickers worth $20.00 (1pc per client order)
3. Please add $18.00 for delivery – 3~5 days, no further discount as Price guarantee lowest.
4. Can issue e-Invoice for your accounting. (upon request)

More choices : CCUT550A Most Affordable Manpower Free Tripod Barrier Gate || CCUT550B Tripod Facial Recognition Gate  ||  CCUT560D Flap Barrier Gate || CCUT8000B Full Height Access Control Gate  || Metal Detector Gate Walk Through  MD500 ||

Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

Specification:

1 Input voltage   AC 220V 50HZ
2 Work voltage : DC 24V /50W
3 Housing Material : 304 Stainless Steel
4 Arm rotation angle : 90/120 degree
5 Lane Width : ≦650mm
6 Opening response time : ≦0.2s
7 Open Signal  : Passive signals (relay signals, dry contact signals,)
8 Communication : RS485 or TCP/IP depends on Reader from Manufacturer.
9 Pass rate  : 25-30 person/min
10 Fire / Emergency Alarm : Gate open, free for passing
11 Working Temperature :  -20℃~+70℃
12 Working environment  : Indoor and outdoor

Installation Guide:
Assemble both sides of guardrail part1 and part2.

Then place the part3 top upper box over part1 and part2 and tighten the mounting screws.

Lay part4 bearing mechanism at the bottom of a rotating shaft.  Install part5 rotation, tighten the top mounting screws.

Check the verticality of the shaft. Adjust and check the level and vertical of the machine.
Mark the fixing position of expansion bolts according to fixing plate on the bottom of each turnstile.
Drill hole by impact drill, fix Expansion screws.
Tighten the expansion screw after the functional test is completed
The card reader is installed on the column.

Connection
1) Connect wire of indicator
2) Connect wire of access control device NO COM NO COM

Control board
Terminal of indicator on the side column
Open signal of access Control board
Connecting AC220V power input

Debugging instruction
1)Check wire : Check whether the connection wire of the gate and the power line are properly connected before power on.
2)Function test:
 Access control relay time should be set to 0 seconds or 1 second.
 Rod can not push without swipe valid card.
 Indicator will show green and the rod of rotation can be pushed to 90 degree or 120 degree when swipe valid card.
 turnstile will lock after 5 seconds

Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

Trouble shooting and maintenance
Trouble shooting

Q1:When access board send open signal, arm move reverse and indicator show reverse?
Reasons: open signal reverse connection
Solotion: exchange SW1 GND and SW2 GND terminal of board.
Q2: Indicator is not working?
Reasons:1. wires loose 2.indicator or board damage
Solution:1 .Check connect wire of indicator
2.Repalce indicator or board.
Q3: How to achieve free for one way ?
1.Remove one of square solenoid
Q4: Arm can not push when swipe card and indicator show green ?
Solution: 1.Check 24V GND output for square solenoid 2.Replace new board or solenoid
Q5: Passing two or three people after swipe card at a time.
Reasons: 1. The Position sensor didn’t be touched by the right screw cap when the turn plate rotating. (Or didn’t receive the effective signal even touched)
2.The square solenoid does not stretch smoothly.
3.Control board damage
Solution: a. Move the position senor inward, Check connect wires to board
b. Adjust square solenoid or replace new one.
c. Changing the square solenoid.
d. Replace a new board.
Q6:Rod can’t turn 90 degrees or 120 degree for one pass?
Reasons: 1. The position sensor is too close to the wheel; 2.If the speed go through is too slow and times out.
Solution: 1.Open the cover of to box ,adjust position sensor 2.Set DIP switch
Q7:It is hard to push the shaft rotation?
Reasons: 1. Bottom bearing rust or damage. 2.The shaft is not vertical
Solution: 1.Replace new bearing 2.Adjust the shaft to vertical

Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

4.2 Maintenance
Full high turnstile require regular maintenance by professionals and daily cleaning to ensure long-term stability and extended equipment life.
1. Maintenance Content:
 Keep the turnstile housing and card reader panels of turnstile gates clean;
 Fasten and lubricate the internal movement structure;
 Check the dust of the driver board and make it cleans.
 Check the connectors and wiring points to ensure the reliability of the connection.
 Check the bearings at the bottom of the shaft

2 Maintenance Methods:
1. Cleaning: Check the housing and card reader panels of the gate, and remove the dust and other dirt to make them clean. wipe rust inhibitor to keep stainless steel bright
2. Rust removal and Lubrication: Check the movement of the flap /slide gate and swing gate, remove rust with sand paper and spread with anti-rust oil if corroded;
3. Screws fastening: Check the connection of the various moving parts, fasten the screws where they are loose to avoid causing fault for long-running;
4.Cleaning the bearings at the bottom of the shaft and add grease.
5. Circuit board cleaning: Cut off the power, and wipe dust of the board by using a clean brush;
6. Lines Checking: Check the connecting lines and solder reinforcement if they are loose off.
Note: This product is the strong professional technical equipment. In addition to daily maintenance, please do not feel free to disassemble it. If a fault occurs while running,

Please notify our service departments or the authorized service agencies promptly to have it maintained.

Do not disassemble it at random to avoid damaging the internal structure or even damaging your interests because of your improper operation.

Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466

Reviews

There are no reviews yet.

Be the first to review “Turnstile CCUT800B Access Control Manpower Free Time Attendance Facial Recognition Trace Together Safe Entry Sim Lim Square CCTV Camera Shop 02-81 90254466”

Your email address will not be published. Required fields are marked *

Donec accumsan auctor iaculis. Sed suscipit arcu ligula, at egestas magna molestie a. Proin ac ex maximus, ultrices justo eget, sodales orci. Aliquam egestas libero ac turpis pharetra, in vehicula lacus scelerisque. Vestibulum ut sem laoreet, feugiat tellus at, hendrerit arcu..

Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.

Donec accumsan auctor iaculis. Sed suscipit arcu ligula, at egestas magna molestie a. Proin ac ex maximus, ultrices justo eget, sodales orci. Aliquam egestas libero ac turpis pharetra, in vehicula lacus scelerisque. Vestibulum ut sem laoreet, feugiat tellus at, hendrerit arcu.

Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.

Start typing and press Enter to search

Shopping Cart

No products in the cart.