TP-LINK ES220GMP Omada 20-Port Gigabit Managed Switch – 16-Port PoE + 2 SFP | Rack Mount for CCTV & Security Systems in Singapore

TP-Link Omada ES220GMP 20-Port Gigabit Managed PoE Switch Singapore | 16-Port PoE+, 2 SFP, 250W, Free Cloud Management | CCTV Security System Repair

The TP-Link Omada ES220GMP is a professional 20-port Gigabit Easy Managed PoE+ switch designed for IP CCTV, Wi-Fi access points, security systems and SME networks that need high PoE capacity, fibre uplinks and centralized cloud management.

The ES220GMP provides 16 × Gigabit PoE+ RJ45 ports, 2 × Gigabit non-PoE RJ45 ports and 2 × Gigabit SFP fibre slots, giving a total of 20 Gigabit interfaces. It delivers a substantial 250W PoE power budget, with up to 30W available per PoE+ port. (TP-Link)

For Singapore CCTV installations, it is particularly attractive as an upgrade from an unmanaged PoE switch because it combines PoE Auto Recovery, VLAN, Port Isolation, IGMP Snooping, QoS, loop prevention, long-distance PoE and Omada centralized cloud management. (TP-Link)

20 Gigabit Ports – Designed for Larger CCTV Networks

The ES220GMP provides:

16 × 10/100/1000Mbps PoE+ RJ45
2 × 10/100/1000Mbps RJ45
2 × Gigabit SFP fibre slots

All 16 PoE ports support IEEE 802.3af/at, with up to 30W per port and a combined available PoE budget of 250W. (TP-Link)

This makes it suitable for powering multiple compatible:

IP Cameras • Wi-Fi Access Points • IP Intercoms • VoIP Phones • Door Access Devices • Other PoE Equipment

250W High-Power PoE Budget

A 16-port PoE switch needs enough power capacity to operate all connected devices reliably.

The ES220GMP provides a 250W total PoE budget. (TP-Link)

For example, a CCTV system may contain conventional fixed IP cameras together with higher-power devices such as PTZ cameras or Wi-Fi APs. The actual total connected load should always be calculated rather than assuming every PoE port can simultaneously consume its theoretical 30W maximum.

PoE Auto Recovery – Useful for CCTV

One of the strongest CCTV-oriented features is PoE Auto Recovery.

TP-Link specifically positions the ES220GMP for surveillance networking and provides PoE recovery functionality for connected PoE devices. Under standalone mode, PoE Auto Recovery can automatically detect and attempt to recover an unresponsive PoE device. Under controller mode, TP-Link specifies manual PoE recovery. (TP-Link)

This can be useful when an IP camera becomes unresponsive.

Instead of immediately travelling to site simply to disconnect and reconnect the camera’s power:

CAMERA OFFLINE → PoE RECOVERY → CAMERA POWER CYCLE → CAMERA RESTART

If the fault is caused by cabling, hardware failure or another physical problem, an on-site technician will still be required.

Up to 250m Long-Distance PoE

TP-Link provides an Extend Mode supporting PoE transmission up to 250 metres under specified conditions. (TP-Link)

This can be useful for CCTV cameras installed at:

Car Parks • Warehouses • Factories • Long Corridors • Compounds • Guardhouses • Remote Building Areas

There is an important engineering limitation: TP-Link states that ports operating in the 250m extended mode are reduced to 10Mbps, and actual distance depends on cable quality. (TP-Link)

Therefore, long-range mode should be engineered according to the connected camera’s actual bitrate and network requirements.

2 × Gigabit SFP Fibre Ports

The 2 × Gigabit SFP slots are particularly useful for CCTV systems spread between different buildings, floors or network cabinets. (TP-Link)

A typical fibre CCTV architecture could be:

MAIN CONTROL ROOM / NVR
↓
FIBRE BACKBONE
↓
ES220GMP
↓
16 × PoE IP CAMERAS

Compared with long copper links, fibre is valuable for building-to-building connectivity, longer network distances and electrical isolation between network sections.

Compatible SFP modules must be selected according to fibre type, connector, wavelength and required transmission distance.

Omada Cloud Centralized Management

The ES220GMP supports centralized management through the Omada ecosystem, including cloud-based, hardware-controller and software-controller deployment options. (TP-Link)

Administrators can manage compatible networks through a web interface or Omada app.

This is particularly useful for companies operating multiple CCTV or network sites:

HQ • Branch Offices • Warehouses • Shops • Construction Sites • Commercial Buildings

Instead of treating every switch as an isolated device, compatible Omada infrastructure can be brought into centralized management.

Lifetime Free Omada Cloud Essentials

For cost-conscious SMEs and surveillance installations, Omada Cloud Essentials is particularly attractive.

TP-Link’s Singapore product page describes Cloud Essentials as offering lifetime-free cloud without additional fees, with no dedicated hardware or software controller required for the Essentials cloud architecture. It also supports centralized multi-site management, web/app access and zero-touch provisioning for supported devices. (TP-Link)

This means businesses can deploy supported Omada equipment without necessarily purchasing a separate hardware controller just to obtain basic centralized cloud management.

There is an important distinction: Omada Cloud Essentials is the free tier; Omada Cloud Standard contains additional advanced capabilities and requires licensing/subscription. (TP-Link)

VLAN for CCTV Network Segmentation

The ES220GMP supports 802.1Q VLAN, Port-Based VLAN and MTU VLAN, with up to 32 VLAN groups in the documented specification. (TP-Link)

A professionally designed commercial network can therefore separate traffic such as:

VLAN 10 – CCTV

VLAN 20 – Office Network

VLAN 30 – Wi-Fi

VLAN 40 – Door Access / Security

VLAN 50 – Guest Network

VLANs improve logical separation, but proper security still requires suitable gateway/firewall rules and overall network design.

Port Isolation for CCTV Security

Port Isolation is particularly useful in surveillance networks.

Individual camera ports can be logically restricted from directly communicating with one another while still allowing the required traffic toward the NVR or network uplink, depending on the chosen configuration.

TP-Link specifically includes Port Isolation among the ES220GMP’s surveillance-network features. (TP-Link)

Automatic Loop Prevention

Network loops can cause broadcast storms and potentially disrupt an entire CCTV or business network.

The ES220GMP provides automatic loop prevention / loop detection capabilities, reducing the risk caused by accidental cabling loops. (TP-Link)

This is particularly useful at sites where network equipment is frequently changed or maintained.

IGMP Snooping

The switch supports IGMP v1/v2/v3 Snooping and Fast Leave. (TP-Link)

IGMP Snooping helps the switch handle multicast traffic more efficiently by forwarding relevant multicast traffic only where required instead of flooding it unnecessarily across the network.

QoS – Traffic Prioritisation

The ES220GMP includes QoS functions including Port-Based, 802.1p and DSCP QoS, eight priority queues, bandwidth control and storm-control functions. (TP-Link)

This gives network administrators more control over how different types of traffic are handled.

40Gbps Switching Capacity

The ES220GMP provides:

40Gbps Switching Capacity
29.76Mpps Packet Forwarding Rate
8K MAC Address Table
4Mbit Packet Buffer
15KB Jumbo Frame (TP-Link)

These specifications make it considerably more capable than a basic unmanaged desktop PoE switch for larger surveillance and commercial networks.

Fast PoE + Perpetual PoE

The current specification also lists both Fast PoE and Perpetual PoE. (TP-Link)

These functions are useful where connected PoE equipment should be powered efficiently during switch startup or selected switch restart scenarios, reducing unnecessary interruption to connected devices.

6kV Surge Protection

TP-Link’s Singapore specifications list ±6kV surge protection for the ES220GMP. (TP-Link)

This provides additional electrical protection for the switch, although it does not eliminate the need for proper earthing, surge-protection design and appropriate protection of outdoor CCTV cabling.

19-Inch Rack Mount Design

Unlike smaller desktop Omada switches, the ES220GMP is designed for professional rack installation.

Its dimensions are approximately:

440 × 180 × 44mm

The switch is rack-mountable and uses a metal enclosure. (TP-Link)

This makes it suitable for installation together with:

NVR • Router • Firewall • Fibre Patch Panel • Network Patch Panel • UPS • Server Rack

The current datasheet lists two cooling fans, so it should not be marketed as a fanless model. (TP-Link)

Ideal CCTV Network Architecture

A professional deployment could use:

INTERNET / WAN
↓
ROUTER / FIREWALL
↓
CORE NETWORK SWITCH
↓
FIBRE / GIGABIT UPLINK
↓
TP-LINK ES220GMP
↓
16 × PoE CCTV CAMERAS

with the NVR, workstation and other security infrastructure connected according to the project network design.

CCTV Security System Repair Singapore

The ES220GMP is also suitable when upgrading or replacing an ageing CCTV PoE network switch.

Common CCTV network faults include:

Camera Offline

PoE Port Failure

PoE Power Insufficient

Network Loop

Intermittent Camera Connection

Damaged Network Cable

Failed SFP Module

Fibre Link Failure

Old PoE Switch

Network Configuration Problem

A proper troubleshooting process should identify whether the actual problem is caused by the camera, Cat6 cable, fibre, SFP, PoE switch, NVR, router, power supply or configuration before equipment is replaced.

Repair or Replace an Old CCTV PoE Switch?

Not every offline camera means the camera itself has failed.

A useful troubleshooting sequence is:

1. Check PoE power

2. Check network link

3. Test camera on another port

4. Test Cat5e/Cat6 cable

5. Check switch PoE budget

6. Check VLAN/network configuration

7. Check NVR connectivity

8. Check fibre/SFP uplink

If an old unmanaged switch is unreliable or no longer provides enough PoE capacity, replacing it with a managed ES220GMP can also provide better network diagnostics and centralized management.

TP-Link ES220GMP Key Specifications

*Extended PoE operation is subject to cable quality and operating conditions; TP-Link specifies 10Mbps port speed in 250m Extend Mode. (TP-Link)

TP-Link Omada ES220GMP Singapore – SGCCTV

The ES220GMP is particularly suitable for customers who have outgrown an 8-port PoE switch and need a more professional CCTV network platform.

16 PoE+ + 2 RJ45 + 2 SFP = 20 GIGABIT PORTS

250W PoE • FIBRE UPLINK • VLAN • CLOUD MANAGEMENT • PoE RECOVERY • 250M EXTEND MODE • RACK MOUNT

Suitable for:

CCTV • IP CAMERA • SECURITY SYSTEM • Wi-Fi AP • OFFICE • FACTORY • WAREHOUSE • COMMERCIAL BUILDING • MULTI-SITE NETWORK

For CCTV Security System Repair, PoE Switch Replacement, Network Troubleshooting and Omada Network Upgrade in Singapore:

www.SGCCTV.com.sg

10 Frequently Asked Questions

1. How many ports does the TP-Link ES220GMP have?
It has 20 Gigabit interfaces: 16 PoE+ RJ45 ports, 2 non-PoE Gigabit RJ45 ports and 2 Gigabit SFP slots. (TP-Link)

2. How many CCTV cameras can ES220GMP power directly?
It provides 16 PoE+ ports, so up to 16 compatible PoE devices can be connected directly, subject to the 250W total PoE budget and each device’s power requirement. (TP-Link)

3. What is the maximum PoE output?
Each PoE+ port supports up to 30W, with a combined available budget of 250W. (TP-Link)

4. Does ES220GMP have fibre ports?
Yes. It provides 2 × Gigabit SFP slots, useful for fibre uplinks between network cabinets, floors or buildings. (TP-Link)

5. Does it support free cloud management?
Yes. Supported deployments can use Omada Cloud Essentials, which TP-Link describes as lifetime-free cloud without additional fees for the Essentials service. Advanced Cloud Standard features have separate licensing terms. (TP-Link)

6. Can I remotely restart an offline CCTV camera?
The ES220GMP supports PoE recovery functionality. TP-Link specifies automatic PoE recovery in standalone mode and manual PoE recovery in controller mode. (TP-Link)

7. Can PoE operate up to 250 metres?
Yes, using the supported extended-distance mode under the manufacturer’s conditions. The relevant port operates at 10Mbps in 250m mode, and actual distance depends on cable quality. (TP-Link)

8. Does the ES220GMP support VLAN?
Yes. It supports 802.1Q, Port-Based and MTU VLAN, making it useful for separating CCTV and other network traffic. (TP-Link)

9. Is ES220GMP rack mountable?
Yes. It has a 440mm-wide metal enclosure and is designed for rack mounting. (TP-Link)

10. Is ES220GMP suitable for replacing an old CCTV PoE switch?
Yes, where its port count, 250W power budget and Gigabit/SFP architecture meet the project requirements. Its VLAN, PoE recovery, cloud management and diagnostic functions can provide a significant management improvement over a basic unmanaged PoE switch.

15 Facebook Hashtags

#TPLink #TPLinkOmada #ES220GMP #Omada #PoESwitch #ManagedSwitch #GigabitSwitch #CCTVSwitch #CCTVNetwork #IPCamera #SecuritySystem #CCTVRepair #PoESwitchSingapore #SGCCTV #CCTVSingapore

Looking for a high-performance managed PoE switch for your CCTV and security system? The TP-LINK ES220GMP Omada 20-Port Gigabit Managed Switch is the perfect choice for businesses in Singapore that require reliable networking, Power over Ethernet (PoE) support, and easy rack mount installation. Designed for CCTV, IP cameras, access points, and enterprise networks, this switch ensures seamless connectivity and centralized management.

Key Features of TP-LINK ES220GMP Omada 20-Port Gigabit datasheet Managed Switch 16-PoE 2-SFP Rack Mount CCTV Singapore Security System Repair NEW Omada Switch

• 20 Gigabit Ports – Deliver fast, stable connections for CCTV, IP cameras, and security devices.

• 16 PoE Ports – Supports Power over Ethernet to power CCTV cameras, access points, and IP phones directly.

• 2 SFP Slots – For long-distance fiber uplinks, ensuring flexible network expansion.

• Rack-Mount Design – Fits neatly into standard racks for professional server room setup.

• Omada SDN Integration – Enables centralized management, VLAN configuration, traffic monitoring, and advanced security settings.

• High Power Budget – Efficiently powers multiple CCTV cameras and security devices without external adapters.

• Business-Grade Reliability – Ideal for CCTV networks, offices, retail outlets, and enterprise environments in Singapore.

Benefits for CCTV & Security Systems

✔ Simplified Installation – Power and data through a single cable, reducing clutter and costs.
✔ Stable & Secure Network – Prevents downtime in critical CCTV surveillance and access control systems.
✔ Scalable Solution – Expand your CCTV and security infrastructure with ease.
✔ Professional-Grade Performance – Designed for 24/7 operation in demanding environments.
✔ Smart Management – Control bandwidth, VLANs, and device priorities for maximum efficiency.

Applications in Singapore

• CCTV Camera Networks – Power multiple IP cameras with PoE.

• Access Control & Door Systems – Reliable power and connectivity for biometric readers and controllers.

• Retail & Commercial Buildings – Centralized management for multi-device networks.

• Security System Repair & Replacement – Ideal upgrade for businesses looking to modernize their infrastructure.

Why Choose CHOICECYCLE Singapore?

At CHOICECYCLE Singapore, we provide supply, installation, and repair of CCTV and security system networking equipment, including the TP-LINK ES220GMP Omada Managed Switch. Whether you need a new deployment or replacement of an old switch, our experts ensure seamless integration, professional setup, and after-sales support.

📞 WhatsApp us at +65 98534404
📧 Email: enquiry@choicecycle.com.sg
🌐 Visit: https://choicecycle.com.sg

Upgrade your CCTV and security system with the TP-LINK ES220GMP Omada 20-Port Gigabit Managed PoE Switch – built for performance, reliability, and smart management in Singapore.

More choice of Wireless Products : Cheap WIFI Mesh Ruijie  ||  TP-Link Professional Mesh  || CCWB108 CCWB308  || Elevator Contactless Sensor ||

CHOICE Wireless Alarm System || Hikvision Wireless Alarm System ||